The Key Features of IS2000 when Integrating to the Bosch Alarm Panel

Hardware

  • Easy Configuration – Manually add device, programming requires only the IP address of the controller – Driver must be restarted after this process.
  • Partitioning can be performed to the device level.
  • Hardware Tree can be sorted alphabetically or numerically, sort order follows through out the application.
  • Find option available to locate Hardware in the Hardware Tree.
  • Limits
    • 128 Controllers per Driver
    • 3 On-board Relays
    • 8 On-board monitor points – no change when masked (green / pink)
    • 128 Off Board Relays
    • 247 Monitor Points
    • 8 Readers
    • Must enable each device before a status will appear
    • Supports 26 bit HID card format only
    • 9600 baud rate
    • Reader modes card or pin
  • Controller Import Utility – Renders the panel inoperable for five to ten minutes.  Imports Master Users fully, Sub-Users are imported the way they are stored in the controller, without first and last name.  The import includes the Master User number and the Sub-User number, which is done via Hardware Manager.
  • Information is downloaded to all controllers no redundant data entry.  Authority levels are downloaded to all controllers in a controller group vs. the previous version which only downloaded to a specific controller.
  • Real–time status of all devices by controller.  Monitor Points, Readers and Outputs can be controller via Point Status. 

 

Personnel Manager

  • Supports 249 Master Users 747 Sub-Users for a total of 996 users including sub-users.
  • Support for first card number only.  Does not support two (2) card numbers.
  • Facility code cannot exceed 255.
  • Master User
    • Sub-User, 3 sub-users per Master user
    • Once a Master user has reached the maximum sub-users the master user will no longer be available for selection
    • Sub-Users cannot change the authority levels, pin or facility code
  • Date features
    • Vacation Start / Stop
    • Activate / Deactivate
    • Cards not used within a specified period of time can be automatically disabled
  • Date / Time Stamped notes field
  • Watch Windows
  • Trace History
  • Advanced Find / filter
  • Headers can be modified to fit the customers needs
  • Field level security by profile
  • Activate / Deactivate by check mark
  • Authority levels – Up to 8 areas per controller, authority levels are created in the RAM IV program.
    • 1 User group per controller, there are a max of eight user groups to select from
    • Up to eight Authority levels per user.
  • RAM IV
    • Connects via Ethernet to the controller at half duplex
    • Connection is established using http://
  • Downloads will take place by order of the way the cards were added to the system.
  • Backups and Archives
    • Built in Back up utility backups can be executed manually or scheduled
    • Archive utility allows for scheduled or manual archives.
  • Profile Manager
    • Advanced profile manager, allows for modules to be disabled
  • Log Manager
    • Email on Event
    • Customize the way Event Manager displays / logs events
  • Operators
    • Windows vs. IS2000 authentication
  • Controller Groups
    • Drag and drop functionality
  • Graphic Maps
    • Areas 
    • Zoom Layers – up to nine (9) zoom layers per graphic
  • Alarm Manager
    • Custom Alarm Message, configured by device in Hardware Manager giving additional instructions if the point goes into alarm
    • Double click on an alarm to silence the alarm
    • Canned acknowledgement responses by profile
    • Jump to plan on alarm
    • Alarms are presented in order of priority, date and time written to the database and then by device address
  • Alarm Integration
    • Area(s) can be disarmed via keypad or reader(s)
    • Disarm by a single card or groups of cards

Note:  Only GV3 Firmware 8.05 is supported and duplicate card numbers are not allowed within the same controller group.