ELK-M1

Supported Features

  • Virtually unlimited number of users (host dependent).
  • Arm / Disarm of Areas
  • Activate / Deactivate outputs
  • Real-time status of outputs / inputs using Point Status
  • Cross platform activation using the Mercury hardware platform and Triggers / Macros
  • Graphic Maps
    1. Arm / Disarm areas from graphic maps
    2. Activate / Deactivate outputs from graphic maps
    3. Area status indication by keypad from graphic maps (Armed, Disarmed, Not Ready)
  • ELK Automation between Mercury readers.  Valid card read from a Mercury reader will automatically disarm the ELK areas associated with that reader.

Please Note:  We do not recommend polling more than 32 ELK panels/controllers per driver.  If you wish to poll more than 32 ELK panels/controllers, then please add another ELK driver on another PC

 

Useful Links

ELK Integration- How to Setup   

Press Release

 

IS2000 Software Licensing:

Licensing for IS2000 is based on number of doors.  With an Alarm Panel, the licensing is based on the number of readers/doors that the alarm panel can potentially support. The ELK panels/controllers each support up to 8 readers/doors. Below is a table that can be used to determine which access license would be needed if every reader/door was enabled on the panel/controller:

  • 8 Doors = 1 Alarm Panel
  • 16 Doors = 2 Alarm Panels
  • 32 Doors = 4 Alarm Panels
  • 64 Doors = 8 Alarm Panels
  • 128 Doors = 16 Alarm Panels
  • 256 Doors = 32 Alarm Panels
  • 512 Doors = 64 Alarm Panels
  • 1024 Doors = 128 Alarm Panels
  • 2048 Doors = 256 Alarm Panels

 Shop Online