ELK

ELK

Here is documentation on how to arm/Disarm scripts for use in VertX IS2000/IS100. For the ARM TCP command you can use the following In Triggers and Macros IS100 and IS2000: TCP("192.168.0.179","2101","0Da110034560037^") = ([interfaceid=0][reader=0](E(2,20))) In this example the Elk panel is in IP address 192.168.0.179 we use port 2101 and the…
Programming the ELK Panel Program your ELK controller(s) to send events automatically to the host: Enter the Installer Programming mode: Press "ELK" key + 9 (menu 9) followed by the Right arrow key.  Enter the default Installer code of 172839 when prompted.  Display should read: "01 - Bus Module Enrollment" …
Supported Features Virtually unlimited number of users (host dependent). Arm / Disarm of Areas Activate / Deactivate outputs Real-time status of outputs / inputs using Point Status Cross platform activation using the Mercury hardware platform and Triggers / Macros Graphic Maps Arm / Disarm areas from graphic maps Activate /…
Below are steps for the ELK integration: Program your ELK controller(s) to send events automatically to the host: Enter the Installer Programming mode: Press "ELK" key + 9 (menu 9) followed by the Right arrow key. Enter the default Installer code of 172839 when prompted. Display should read: "01 -…