Cards and Readers

Cards and Readers

RF interference can affect the Wiegand signal returning a System Kit on the reader cable.... Use a Toriod Choke Core around the wire going back to the Reader terminal block. Chock goes nearest to the door/reader.  Example: Radio Shack part # 273-104 (2-pack) for $8.39. Diodes are provided with each…
Enrollment Reader Setup The universal card format allows the customer to easily takeover existing sites and handles multiple formats without knowing specific card information about the existing cards. The Universal Format only applies to the VertX/Edge hardware and will require the use of an enrollment reader. On first use, the…
http://www.hidglobal.com/pdfs/prox_ord/HTOG.pdf
The P/N number for the unit must have an '09' at the end of the model number. Example: 5355AGK09.  This allows the PIN and Card read to be treated as to different and distent signals and events. Any other number (for example 14) would provide a Wiegand signal for the…
Of the many keypad configurations present, the two that work best with IS2000 include: 1. 8 bit message (Dorado) 2. Standard 26 bit output Outlined below are the applicable reader modes and the corresponding IS2000 fields (personnel manager) based on the two keypad configurations and the hardware platforms. SCP-2/EPC-1 8…
General Infomation about the Magnetic Stripe Card In most magnetic stripe cards, the magnetic stripe is contained in a plastic-like film. The magnetic stripe is located 0.223 inches (5.66 mm) from the edge of the card, and is 0.375 inches (9.52 mm) wide. The magnetic stripe contains three tracks, each…
How many readers do you support? You can support a virtually unlimited number of doors from a single website, however you will need to add a PC to your local network for every 2048 doors to manage the field hardware and collect real-time events. How many card types? 255 Card…
The 26-bit format consists of 255 possible facility codes. Within each facility code there is a total of 65,535 unique card numbers.