Access -> Device Groups / Areas Disarming Inputs by schedule Device Groups / Areas are used to configure hardware points such as readers, inputs and outputs to arm, disarm, unlock, or lock automatically during specified time schedules. Click on the Access menu and click on Device Groups / Areas. Unlock…
Displaying an Access Trace History Report It is often desired to research the locations in which a card holder has presented his / her card.  The Access Trace History Report will display the last fifty card reads and the whether card holder was granted or denied access. •  Unlock the…
Door Contact Properties Door contacts are used to determine the position of the door.  By default each reader module assigns at least one (1) door contact.  Depending on the type of sub-controller two (2) door contacts may be shown in the hardware tree.  The door contacts are generally address points…
NOTE:   Door Schedules are used to program reader(s) to unlock on a specific time of day for a specific timed interval.  This functionality is achieved via the IS2000 server and therefore requires that the IS2000 server be running in order for the reader(s) to follow the programmed unlock timed intervals.…
From Hardware Manager unlock the pad lock to allow editing of the screen.  By default the Permissions option is hidden by profile.  To view these options go to Settings, Profile Editor and highlight Hardware Manager from the list on the left.  From the column on the right place a check…
Duplicate Card Number in IS2000   If a customer requires duplicate card numbers in Personnel Manager then this is achievable by editing the 'No_Duplicates' registry value from 1 to 0 in the 'HKEY_LOCAL_MACHINE\SOFTWARE\Imron Corporation\IS2000\OS' section of the registry. Please note that you do not need to restart the software after…
If a duress code is entered at a keypad the system can be configured to do any number of things. For example all perimeters doors can be locked down, sounders / strobes can be configured to go off. The system can be configured to either deny on duress or grant…
Creating Elevator Floor Groups NOTE:   Please read this article if you haven't configured your hardware yet.  Click on the Access menu and select Access Levels. Unlock the pad lock to allow editing of the Access Levels module. If Controller Groups are being utilized, select the appropriate Controller Group from the drop down…
Note:  Elevator Control is ONLY supported by the Mercury controllers. From Hardware Manager follow these steps: Add the Mercury Access Control Driver Add the Controller Add the Sub-Controllers From the Sub-Controller readers, select the reader that corresponds to the elevator reader Modify the following settings: Device: This option will remain…
Unlock the pad lock to allow editing of the Personnel Manager module. Click on the Advanced Access tab located in Personnel Manager. Locate the card holder to be traced from the card holder list located in the left hand column.  For information on using find / filter options to locate…
Unlock the pad lock to allow editing of the Personnel Manager module.  Click on the Advanced Access tab located in Personnel Manager.  Click the Personnel Access button.  From the hardware tree, click the icon to the left of the Access Control driver to expand the hardware.  From the hardware tree,…
Personnel Manager -> Employee Info Tab The Employee Info tab is used to expand the information available regarding the card holder.  Each of the fielda can have field level permission assigned by profile in order to secure the data. Personnel Manager -> Employee Info Tab -> Company Adding a Company…