Hardware Manager Associating Video on Event / Alarm •  From Hardware Manager Click on the pad lock to allow editing of the Hardware Module. •  Complete the installation and configuration of the video server.  For installation instructions see help section Video Integration. •  Click to the left of the Sub-Controller…
Hardware Manager Configuring the Camera Properties •  From Hardware Manager Click on the pad lock to allow editing of the Hardware Module. •  Click to the left of the Sub-Controller to expand the Sub-Controller tree. Select a camera from the tree. •  From the Camera’s Properties box, assign a camera…
Access -> Personnel Manager Advanced Access Personnel Access On occasion is necessary to determine card holders that have access to a specific reader(s).  The Personnel Access Report will display all card holders with access to selected reader(s) and can be used for auditing purposes. •  Unlock the pad lock to…
Open the Windows Calculator; this can be done by clicking on the Windows Start Menu, All Programs, Accessories, Calculator.From the Windows Calculator, click on the View Menu item and select Scientific. Click on the Decimal Radio button if not already selected. Type in the number that was shown in the IS2000…
If you get a Bit Number but do not get a Facility Code in the Event Manager, then double-check that the data and clock wires (White & Green) have been landed on the proper termininals.  Having the wire in the reverse will cause this type of display and correcting the…
Restore Selected Controllers to Last Known State when Driver Starts If this driver property is set to 'True', then all controllers that have the controller property 'Restore to Last Known State after Reset' set to 'True' will restore the last known state of the controller's reader modes, output relays, and…
Settings -> Log Manager Enabling / Disabling Events From the Settings -> Log Manager Menu click on the pad lock to allow editing of the Log Manager screen. Enter the name of the event to modify in the Find text box. With the event highlighted, click on the drop down…
Device Groups / Areas will allow for any combination of grouped points in a Device Group / Area to be disarmed, unlocked, armed, or locked manually and will control all devices in the group once the command has been sent. Click on the Access menu and click on Device Groups…
Trigger Definitions Description:  Text field to describe what the Trigger does. Events:  The event that will trigger the Macro. Address:  The specific address for where the Event occurred.  Based on the Event, you can select (ALL) for addresses in the controller or a specific address. Trigger Code:  A Trigger Code…
Drive Gate Settings Input Supervision for input 1: 0 normally closed Input Supervision for input 2: 1 normally open Note: If input 1 and/or input 2 are red, in the hardware properties, then check wiringDefault reader mode: Card Only (for both readers) Door Held Time, Door Contact Input 2: 50 seconds Output 1 Pulse…
The Occupancy Control module can be accessed from 1 of 2 areas in the IS2000 software: Access Menu Click on the Access Menu from the Navigation toolbar Select Occupancy Control from the dropdown menu Note:  Permission to the Occupancy Control module from the Access menu is determined based on the…
•  From Hardware Manager Click on the pad lock to allow editing of the Hardware Module. •  Highlight the Controller from the column on the left, right mouse-click and select Edit, Add New Sub-Controller.      o  Driver Controller Address – This field will automatically be populated with the address…