Adding New Card Format(s) for VertX/Edge

1.  Click on the VertX driver in Hardware Manager.
2.  Click on the Card Formats tab, under Properties.
3.  Select the card format needed, click on the green arrow. (If the card format is not available make sure to have the appropriate .vff saved under the Data folder.)
4.  Click on the save button, which should update the controller.
5.  Enter the necessary info in Personnel Manager.   Select appropriate card format associated to the card number.
6.  After associating a card format for the first time with a card number, click on the save button.
7.  Perform a personnel download.
8.  When adding any subsequent card numbers with the SAME card format, simply click on the save button.  A personnel download is NOT required.