ONSSI- Adding a new Sub-Controller

  • From Hardware Manager click on the pad lock to allow editing of the Hardware Module. 
  • Highlight the driver from the column on the left, right mouse-click and select Edit, Add New Controller.
    1. Driver Address – This field will automatically be populated with the address of the Driver the Controller is installed beneath. 
    2. Controller Type – Select the type of controller from the drop down list.   
    3. Controller Address - The Controller address is a virtual address assigned by the Access Control Security Application and should remain at 0.  The next available address will be assigned to the Controller. 
    4. Controller Description – Enter a Controller Description, this description will be displayed throughout the software in whenever reference to the Controller is made. 
  • Click the green check mark to save changes or the blue x to exit without saving.