Hardware Manager

Hardware Manager

The Hardware Manager module manages all of the hardware in the system using software drivers.

Video Adding Drivers

Video Adding Controllers and Sub-Controllers

Video Controller Status / Address

Address – The physical address of the Reader is automatically assigned within the Access Control Security Application. If the reader module has two (2) readers the addressing for the Reader will be R1 for reader one (1) and R2 for reader two (2). Device_Type - The type of device attached…
Request to Exit Properties Request to Exit (REX) devices are used to allow free egress out of the door.  By default each reader module assigns at least one (1) Request to Exit (REX).  Depending on the type of sub-controller two (2) Request to Exit devices may be shown in the…
System Partitioning can be used to partition system devices, resulting in additional hardware security.  System Partitioning is commonly used in multi-tenant buildings, where hardware for each floor / tenant can be configured and installed using one centralized database making management of the system for building administrators easily accessible.  Using System…
Hardware Manager Using System Partitioning to limit Hardware Devices Each device point in the system can be configured with System Partitioning.  If System Partitioning is configured for an individual device point, that point will become unavailable / available for view and control system wide, for example:  Point Status, Access Levels,…
Hardware Manager -> Web Server The Web Server is an integrated part of IS2000 and does not require any additional third party Web Server products to be installed.  The Web Server automatically becomes available for configuration once the Access Control Security Application has been licensed for one or more clients.…
Page 3 of 3