Using the Filter feature to locate a Personnel Record Unlock the Module to allow editing of the Personnel module. Click on the binocular icon. The filter box will be displayed. Data Field:  Select the field to be filtered from the drop down pick list.  For example, if a filter based…
To modify or view the Configuration Options for the Access Control Security Application, go to the Windows Start Menu, All Programs, Access Control Security Application, and Configuration.   License Type - During the installation process the License Type is automatically selected based on the type of installation chosen.  To change…
In order to configure Global Input to Output Linking, you must create a text file in notepad and place it within the Remotepath with the following filename: "ControlPoint<Driver ID>.ini" The contents of the file should contain the Monitor Point that triggers the relay as the section header in brackets, followed…
Graphic Maps are used to graphically represent the facility or multiple facilities. This module allows the operator to graphically zoom in and out of buildings, view real-time status of devices, and control devices based on their floor plan positioning. Creating Floor Plans Up to nine (9) zoom layers can be…
Hardware Manager Associating Video on Event / Alarm •  From Hardware Manager Click on the pad lock to allow editing of the Hardware Module. •  Complete the installation and configuration of the video server.  For installation instructions see help section Video Integration. •  Click to the left of the Sub-Controller…
Hardware Manager Configuring the Camera Properties •  From Hardware Manager Click on the pad lock to allow editing of the Hardware Module. •  Click to the left of the Sub-Controller to expand the Sub-Controller tree. Select a camera from the tree. •  From the Camera’s Properties box, assign a camera…
HID Global's Networked Access Solutions provide an open architecture, IP-enabled platform for deploying a broad range of access control systems. HID Global’s Networked Access Solutions are offered in two product flavors, EDGE® a single-door PoE-enabled controller and VertX® a traditional topology multi-door controller with downstream interface modules.  VertX/Edge Setup…
http://www.hidglobal.com/pdfs/prox_ord/HTOG.pdf
The P/N number for the unit must have an '09' at the end of the model number. Example: 5355AGK09.  This allows the PIN and Card read to be treated as to different and distent signals and events. Any other number (for example 14) would provide a Wiegand signal for the…
Access -> Personnel Manager Advanced Access Personnel Access On occasion is necessary to determine card holders that have access to a specific reader(s).  The Personnel Access Report will display all card holders with access to selected reader(s) and can be used for auditing purposes. •  Unlock the pad lock to…
Below are steps for the ELK integration: Program your ELK controller(s) to send events automatically to the host: Enter the Installer Programming mode: Press "ELK" key + 9 (menu 9) followed by the Right arrow key. Enter the default Installer code of 172839 when prompted. Display should read: "01 -…
Open the Windows Calculator; this can be done by clicking on the Windows Start Menu, All Programs, Accessories, Calculator.From the Windows Calculator, click on the View Menu item and select Scientific. Click on the Decimal Radio button if not already selected. Type in the number that was shown in the IS2000…