Access -> Guard Tour Adding Readers to a Guard Tour Click on Access, Guard Tour to access the Guard Tour Module To add readers to a specific tour, highlight the tour from the Guard Tours Column located on the left. From the Readers column on the right, highlight the first…
Adding Sub-Controllers using Auto-Setup A sub-controller can be numerous things and includes reader boards, inputs boards and output boards.  Sub-Controllers may be added to the Access Control Security software using the Auto-Scan feature. This feature is only available for sub-controllers on the RS-485 bus and only applies to the Mercury…
Adding the Bosch Driver The Bosch driver is a separately licensed feature of IS2000, licensing of a minimum of one (1) Alarm panel must have been previously purchased in order for the Bosch driver to come online. From Hardware Manager, unlock the pad lock to allow editing of the Hardware…
Personnel Manager -> Advanced Access Tab The Advanced Access tab contains the following features: Unlock the pad lock to allow editing of the Personnel Manager screen. Operator – Click on the drop down arrow to the right of the Operator tag to associate an Operator record with the card holder…
Database - Click in the field to the right of the Database field to select the correct database type.  The default database installed with the application is Microsoft Access; however, if a conversion is performed this field will need to be changed to a value of 1- SQL Server. Hide…
As alarms occur, the operator will be notified via the IS2000 GUI (Graphical User Interface) through both Event Manager as well as the Information window as shown in the display below. To acknowledge an alarm, click on the Alarm Pending line located in the information window, this window is located…
Alternate Backup Method using Windows Backup An alternative Backup Utility is also provided with Windows XP Professional and higher.  To start the Backup utility, look in System Utilities in the Start Menu (Start, Programs, Accessories, and System Utilities). Click on Setup Automatic Backup file. Select the location to save the…
Anti-Passback   Anti-Passback prohibits a cardholder from entering an area and then "passing" his/her card back to someone else to present to the card reader to gain access. When an access granted event is generated, the Controller and all readers connected to the Controller are immediately aware of the cardholder’s…
IMRON Corporation’s IS2000 and ASSA ABLOY Aperio-enabled locks give you the flexibility to expand your access control system to almost every opening in your facility. IS2000 allows the user to expand their access control and security needs into non-traditional access applications. The Aperio wireless solution seamlessly integrates with IS2000 giving the end user a common GUI…
Here is documentation on how to arm/Disarm scripts for use in VertX IS2000/IS100. For the ARM TCP command you can use the following In Triggers and Macros IS100 and IS2000: TCP("192.168.0.179","2101","0Da110034560037^") = ([interfaceid=0][reader=0](E(2,20))) In this example the Elk panel is in IP address 192.168.0.179 we use port 2101 and the…
The next generation of WiFi Access Control Leverage your IT infrastructure to reduce the cost and complexity of installing access control. Take it to the next level with intelligent access control, innovative technology, and inspired design. The IN120 WiFi lock offers the ease and flexibility of WiFi in a new…
Adding Card Formats (Mercury) A card format is a set of values used to configure a card reader to accept certain bit or data structures and facility codes. Up to eight (8) card formats can be added per SCP / EPC controller. From Hardware Manager unlock the pad lock to…