Address – The physical address of the Reader is automatically assigned within the Access Control Security Application. If the reader module has two (2) readers the addressing for the Reader will be R1 for reader one (1) and R2 for reader two (2). Device_Type - The type of device attached…
Address – The physical address of the Reader is automatically assigned within the Access Control Security Application. If the reader module has two (2) readers the addressing for the Reader will be R1 for reader one (1) and R2 for reader two (2). Device_Type - The type of device attached…
This is now included on the CD and installs under the IS2000 folder. The application will self-configure and bring up the necessary configuration options on a first time usage. Below is a brief overview:Please Note: Replication will only work on systems that are using SQL Server or SQL Express. This…
To access the Report Manager, select the Utilities Menu, and then select Report Manager. The reports are grouped by type of report, for example to locate a report on personnel records, locate the section labeled Personnel Manager Reports. Depending on the type of report executed, certain selection criteria buttons will…
Request to Exit Properties Request to Exit (REX) devices are used to allow free egress out of the door.  By default each reader module assigns at least one (1) Request to Exit (REX).  Depending on the type of sub-controller two (2) Request to Exit devices may be shown in the…
Overview EPC-1 and SCP-2/M Firmware release 1.16.1 now supports SALTO SALLIS devices.  This document outlines configuration changes required to use the SALTO SALLIS locks.  Note:  The EPC-1 and SCP-2/M controllers will only communicate with SALTO routers that have been designed to work with Mercury.  If the wrong router device is…
Saving the Access Trace History Report The Access Trace History report can be saved in several different formats that allow the operator to review and edit the report at a later time.  The report can be saved in PDF, HTML, VPE or ODT file formats. •  Unlock the pad lock…
Saving the Personnel Access Report The Personnel Access report can be saved in several different formats that allow the operator to review and edit the report at a later time.  The report can be saved in PDF, HTML, VPE or ODT file formats. •  Unlock the pad lock to allow…
Schlage AD-Series locks seamlessly integrate with IS2000 to provide a cost effective and scalable access control solution to meet your security needs. IS2000 has been installed in thousands of locations worldwide from government facilities, healthcare sites, manufacturing facilities, universities/schools, residential communities, telecommunication sites, airports, and many more. IS2000 scalable solution…
SCP-M and EPC-1 now support the Schlage Panel Interface Module (PIM) devices with firmware 1.148 and above.   Multi-dropped PIMs Up to 8 PIM devices can be multi-dropped on the RS-485 communication port of the controller.  Since the SCP-M has two ports (labeled 2 and 3), you can attach PIMs…
The firmware download should be done 1 controller at a time.  Once the firmware is loaded the version will display in the controller status screen as x.xx. After which perform a reset to sync the host database with the controller. Please note that firmware downloads can take up to 5…
Skeds The Skeds module will allow the operator to configure schedules for items such as automatic door unlocks. To access the Skeds Module click on the Access, Sked Manager Menu item. Unlock the module to allow editing of the screen. To unlock the module click on the pad lock located…