Below are some additional examples of Select statements from the Profile Editor, used to view personnel records across multiple Controller Groups: Example 1: (Admin) personnel_rec.region in (0,1,2,3) Example 2: (Tenant A) personnel_rec.region in (0,2) Example 3: (Tenant B) personnel_rec.region in (0,3) The examples above assume Controller Group 1 to be…
Access -> Guard Tour Starting / Stopping a Tour Starting a tour Click on Access, Guard Tour to access the Guard Tour Module. To start the tour, click on the green play button icon.  This will begin the tour, from this point the guard must reach the first reader by…
Panel Commands SETDATETIME SILENCEBELL   User Database Commands UPDATEUSERNAME UPDATETOKENTABLE UPDATEUSERCLASS BULKUSERNAMEUPDATE BULKTOKENTABLEUPDATE BULKUSERCLASSUPDATE READUSERNAMES READUSERCLASSES READTOKENTABLES READUSERNAMES READUSERCLASSES READAUTHORITYLEVELS   Skeds Database UPDATESKED READSKEDS SETHOLIDAY READHOLIDAYS   Monitor Point Commands BYPASSPOINT GETPOINTTEXT SETPOINTTEXT BULKPOINTTEXTUPDATE READPOINTTEXTALL   Door Commands DOORCOMMAND GETDOORAREAS   Realy Commands SETONBOARDRELAY SETOFFBOARDRELAY   Area Commands ARMAREA…
How many readers do you support? You can support a virtually unlimited number of doors from a single website, however you will need to add a PC to your local network for every 2048 doors to manage the field hardware and collect real-time events. How many card types? 255 Card…
System Partitioning can be used to partition system devices, resulting in additional hardware security.  System Partitioning is commonly used in multi-tenant buildings, where hardware for each floor / tenant can be configured and installed using one centralized database making management of the system for building administrators easily accessible.  Using System…
This will work on any machine connected to the internet.  If the technician is unable to determine if a port is open on the router and has been forwarded properly this utility can be used for troubleshooting.   http://www.yougetsignal.com/tools/open-ports/  also through this utility you can verify the route of the…
Hardware Easy Configuration – Manually add device, programming requires only the IP address of the controller – Driver must be restarted after this process. Partitioning can be performed to the device level. Hardware Tree can be sorted alphabetically or numerically, sort order follows through out the application. Find option available…
The 26-bit format consists of 255 possible facility codes. Within each facility code there is a total of 65,535 unique card numbers.
The User_Flags field in the Personnel table is a binary coded digit.  Below is how the bits map out: Bit 1:  Activate/Deactivate Card Bit 2:  Allow 1 Free Anti-Passback Pass Bit 3:  VIP (Anit-Passback Exempt) Bit 4:  ADA (Uses the ADA momentary time that is configured for the reader) Bit…
In Hardware Manager the Web Server states it is not running and I cannot start it. Check to see if any additional web servers are running on the machine.  Often Video products will install and start IIS or Apache.  Two web servers can not run simultaneously on the same machine.…
Time Schedule Controls Click the pad lock once to unlock the module.  Editing of the screen cannot be completed until the pad lock has been unlocked. Click the floppy disk to save the current record. Click the red X to delete the highlighted record. Click the palm tree to access…
Link light doesn't turn ON when I plug a patch cord from the Cobox Micro to the Switcher/Router: Check to make sure that the patch cord is good and is not a crossover cable. Check to make sure the switcher/router is not hard-coded to only accepts devices at 100Mbps.  The…