To Unistall the Services enter the following from a command prompt: sc delete <service name> Examples: sc delete 12000 sc delete 19000 In the example above the 12000 represents the Mercury driver and the 19000 represents the VertX driver.
Access -> Device Groups / Areas Unlocking readers by schedule Device Groups / Areas are used to configure hardware points such as readers, inputs and outputs to arm, disarm, unlock, or lock automatically during specified time schedules. Click on the Access menu and click on Device Groups / Areas. Unlock…
Site file- > Dongle Close the Access Control Security Application on the server and all client machines. Save the .sid (Site File) to the Data folder on the server. The default location of the Data folder is C:\Program Files\Application Name\Data. Launch IS2000 on the server. From the Help, About box…
Hardware Manager Using System Partitioning to limit Hardware Devices Each device point in the system can be configured with System Partitioning.  If System Partitioning is configured for an individual device point, that point will become unavailable / available for view and control system wide, for example:  Point Status, Access Levels,…
Using the Find feature to locate a company •  Unlock the pad lock to allow editing of the Personnel module. •  Click on the Employee Info tab. •  Click on the ellipse to the right of the Company tag.  The ellipse is the box with three (3) dots. •  From…
Using the Find feature to locate a department •  Unlock the pad lock to allow editing of the Personnel module. •  Click on the Employee Info tab. •  Click on the ellipse to the right of the Department tag.  The ellipse is the box with three (3) dots. •  From…
Using the Find feature to locate a Personnel Record: Click on the pad lock to unlock the module to allow editing of the Personnel module. Type in the search criteria in the find box.  For example a search for a  card number can be completed by entering in the card…
Using the Find feature to locate a Title •  Unlock the pad lock to allow editing of the Personnel module. •  Click on the Employee Info tab. •  Click on the ellipse to the right of the Title tag.  The ellipse is the box with three (3) dots. •  From…
VertX will ONLY communicate to 1 PC at a time.  VertX will ONLY communicate to the IP address of the PC that has been pre-programmed into its CS/Host IP property. For IS100 (Web Browser product), this will automatically program the CS/Host property of the PC attempting to make the connection,…
LAN 1) Browser trust issue. 2) Make sure ports 4050/4070 are open on the host PC. WAN 1) Program the CS Host IP address in the Network Configuration Page. 2) Append the ?WAN=1 option to the address bar.
*#Access Granted by reader and Accessgroup* L(1)=[interfaceid=0][reader=0][accessgroup=2]E(2,20) L(1)=[\]S(2) G(1)=S(1)&L(1) *Use the UniqueID for the credential from the grant at any door:* TCP("HOST","PORT","MESSAGE") = ([uniqueid=3](E(2,20))) *Though depending on what type of "different TCP Strings" you can use some of the parameters used as filters in the message as well:* TCP("HOST","PORT","Grant Access…
http://xxx.xx.x.xxx/cgi-bin/setup.cgi
Page 16 of 16