Time Schedules -> Holidays Holidays are configured to overwrite normal schedules.  When a programmed holiday occurs, the system is told not to unlock doors or allow access unless the holiday schedule has been overwritten.   Up to 100 holidays can be created per Controller Group and can be configured to…
Running IS2000 as a Service on the Server Please go to the server (not using remote desktop) and log in as the local system admin. Close the Access Control Application and make sure that the associated drivers have stopped running. Run the Configuration Utility Make sure that the AutoLogon information…
By default, SQL Server 2005 Express Edition and SQL Server 2005 Developer Edition do not allow remote connections. To configure SQL Server 2005 to allow remote connections, complete all the following steps: * Enable remote connections on the instance of SQL Server that you want to connect to from a…
The Mercury driver logs the date/time stamp according to the PC's Time Zone configuration.  You can change the PC's Time Zone setting via the operating system, or you can set the Zulu_Time property to 1 in the RemotePath\Drivers\12000.ini file under the [General] section.  Please note that it is recommended that…
Configuring the VertX IP address •  From the Host computer configure the IP address of the host computer to be 169.254.242.122 and a sub-net of 255.255.255.0. •  Connect a cross-over cable from the host computer to the VertX controller. •  From an Internet Explorer browser type http://169.254.242.121/cgi-bin/setup.cgi . NOTE:  The…
Hardware Manager Configuring VertX Reader Modes The VertX hardware platform including the Edge plus hardware devices are capable of the following pin functions: NOTE: When using a combination reader that makes use of both card and pin in a single reader and the card and pin feature will be used,…
From the VertX controller's perspective, what IP address does it see the IS2000 server as?  That is the IP address that should be entered into the CS Host property for each respective controller.  Port forwarding of 4050 and 4070 may need to be enabled in the routers to achieve this.…
Max Controller Groups - By default the system assigns a Max Controller Groups amount of 20 Controller Groups.  This value can be modified up to 1000 regions by click in the box to the right of Max Controller Groups and selecting the desired value up to 1000.  Once this value…
Note:  Controller Group one (1) is designated the 'admin' Controller Group. When configuring Controller Groups the operator should add the hardware from Controller Group two (2) and on.If an access level is not assigned at the time the record is created, the record will automatically be assigned to Controller Group…
Each hardware device has its own set of properties that can be configured to allow the operator to customize the hardware to meet their needs.  The default TCP Port for the controller's communication to the IS2000 driver is 4370. From the Hardware Manager click on the pad lock to unlock…
Each hardware device has its own set of properties that can be configured to allow the operator to customize the hardware to meet their needs. From the Hardware Manager click on the pad lock to unlock the Hardware module, without the pad lock unlocked; the controller properties box will not…
From the Hardware Manager click on the pad lock to unlock the Hardware module, without the pad lock unlocked; the controller properties box will not be displayed. Highlight the controller from the hardware tree. Address – The Address field displays the driver number the controller is assigned to in the…