IS2000 application must be installed with Full Administration privileges otherwise driver can be prevented from launching. Best not to have anti-virus software running...McFee is known to cause issues. The Driver is already running in another instance of IS2000.  This is common in Vista as you can have IS2000 open in…
Duplicate Card Number in IS2000   If a customer requires duplicate card numbers in Personnel Manager then this is achievable by editing the 'No_Duplicates' registry value from 1 to 0 in the 'HKEY_LOCAL_MACHINE\SOFTWARE\Imron Corporation\IS2000\OS' section of the registry. Please note that you do not need to restart the software after…
If a duress code is entered at a keypad the system can be configured to do any number of things. For example all perimeters doors can be locked down, sounders / strobes can be configured to go off. The system can be configured to either deny on duress or grant…
When do I use an ER40 vs. Edge Plus device? The ER40 Edge device has an integrated reader, the device will support up to 600 mA shared between the locks and reader when working with POE. If the customer requires the use of their own readers you would want to…
Creating Elevator Floor Groups NOTE:   Please read this article if you haven't configured your hardware yet.  Click on the Access menu and select Access Levels. Unlock the pad lock to allow editing of the Access Levels module. If Controller Groups are being utilized, select the appropriate Controller Group from the drop down…
Note:  Elevator Control is ONLY supported by the Mercury controllers. From Hardware Manager follow these steps: Add the Mercury Access Control Driver Add the Controller Add the Sub-Controllers From the Sub-Controller readers, select the reader that corresponds to the elevator reader Modify the following settings: Device: This option will remain…
Programming the ELK Panel Program your ELK controller(s) to send events automatically to the host: Enter the Installer Programming mode: Press "ELK" key + 9 (menu 9) followed by the Right arrow key.  Enter the default Installer code of 172839 when prompted.  Display should read: "01 - Bus Module Enrollment" …
Supported Features Virtually unlimited number of users (host dependent). Arm / Disarm of Areas Activate / Deactivate outputs Real-time status of outputs / inputs using Point Status Cross platform activation using the Mercury hardware platform and Triggers / Macros Graphic Maps Arm / Disarm areas from graphic maps Activate /…
Default from Address - Enter a valid e-mail address, this will be the default e-mail address shown in the From box when sending e-mails from the Access Control Software Application.  Note:  If a valid e-mail address is not used, e-mail being sent out may be rejected by the recipient’s server.…
Unlock the pad lock to allow editing of the Personnel Manager module. Click on the Advanced Access tab located in Personnel Manager. Locate the card holder to be traced from the card holder list located in the left hand column.  For information on using find / filter options to locate…
Unlock the pad lock to allow editing of the Personnel Manager module.  Click on the Advanced Access tab located in Personnel Manager.  Click the Personnel Access button.  From the hardware tree, click the icon to the left of the Access Control driver to expand the hardware.  From the hardware tree,…
Personnel Manager -> Employee Info Tab The Employee Info tab is used to expand the information available regarding the card holder.  Each of the fielda can have field level permission assigned by profile in order to secure the data. Personnel Manager -> Employee Info Tab -> Company Adding a Company…