Video Integration

Video Integration

Configuring the CCTV Matrix Switcher   It is often desired to have a matrix switcher display cameras based on alarms occurring in IS2000.  This can be accomplished by configuring IS2000 to output ASCII strings via the serial port.This is accomplished by creating / modifying the camera1.ini file located on the…
Supported by IS2000 versions 8.9.22 and above. Please download the latest Infinova Client Viewer from our ftp site: http://imron.com/downloads/V3080-T1018.exe Once installed and upgraded, please perform the following steps: Navigate to the Hardware Manager module of the IS2000 software and Unlock the module. Select the Infinova Driver on the Hardware Tree…
Once you've upgraded, run the IS2000 Configuration program and select the "1- Advanced" option for the Video Manager.  Please note that the Advanced Video Manager requires the .NET Framework so you may need to install that from Microsoft.  Start IS2000 and make sure that the version now says 8.1.97. Here…
IS2000 Milestone ACM Integration   Add New Milestone Driver From IS2000, navigate to the Hardware Manager and Unlock the module. Right mouse click in the Hardware Tree and select the 'Edit -> Add Driver' Add a new Milestone Video Driver from the 'DVR/NVR Video Drivers' category Once created, make sure…
Video Integration Installation of the ONSSI Software Windows 7 and Vista NOTE:  Before the integration will correctly work within the Access Control Security Application, the full ONSSI SDK must be installed each machine in which the video will be displayed including any network client machines. Contact your Technical Support representative…
Video Integration Installation of the ONSSI Software Windows XP 32 Bit, SP3 NOTE:  Before the integration will correctly work within the Access Control Security Application, the full ONSSI SDK must be installed each machine in which the video will be displayed including any network client machines. •  Contact your Technical…