IMRON Corporation’s IS2000 and ASSA ABLOY Aperio-enabled locks give you the flexibility to expand your access control system to almost every opening in your facility. IS2000 allows the user to expand their access control and security needs into non-traditional access applications. The Aperio wireless solution seamlessly integrates with IS2000 giving the end user a common GUI…
The next generation of WiFi Access Control Leverage your IT infrastructure to reduce the cost and complexity of installing access control. Take it to the next level with intelligent access control, innovative technology, and inspired design. The IN120 WiFi lock offers the ease and flexibility of WiFi in a new…
Overview EPC-1 and SCP-2/M Firmware release 1.16.1 now supports SALTO SALLIS devices.  This document outlines configuration changes required to use the SALTO SALLIS locks.  Note:  The EPC-1 and SCP-2/M controllers will only communicate with SALTO routers that have been designed to work with Mercury.  If the wrong router device is…
Schlage AD-Series locks seamlessly integrate with IS2000 to provide a cost effective and scalable access control solution to meet your security needs. IS2000 has been installed in thousands of locations worldwide from government facilities, healthcare sites, manufacturing facilities, universities/schools, residential communities, telecommunication sites, airports, and many more. IS2000 scalable solution…
SCP-M and EPC-1 now support the Schlage Panel Interface Module (PIM) devices with firmware 1.148 and above.   Multi-dropped PIMs Up to 8 PIM devices can be multi-dropped on the RS-485 communication port of the controller.  Since the SCP-M has two ports (labeled 2 and 3), you can attach PIMs…
Each Wireless Access Point ships from the factory with an installed SSL Certificate and DHCP enabled.  The WAP must be commissioned with a unique I.P. address for the host system. This I.P. address will allow the host end system to “see” the WAP on the network.   Commissioning of the…