- From Hardware Manager, unlock the module by clicking on the pad lock icon.
- Highlight one of the VertX controller’s from the Hardware tree list.
- Right mouse click on the controller and select Controller Commands, Reload firmware.
Any controllers installed under the driver will be flashed.
Please note it takes approximately five (5) minutes per controller.
This process should NOT be interrupted once started.
This can be run from the server and/or client(s).
The process will backup the CS Host file and retain the CS Host IP address.
If the controller does not come back online after 7 minutes then attempt to connect to the Network Configuration page and manually set the CS Host IP and Here I Am count.