ONSSI – Adding a New Sub-Controller

  1. From Hardware Manager click on the pad lock to allow editing of the Hardware Module.
  2. Highlight the driver from the column on the left, right mouse-click and select Edit, Add New Controller.Driver Address – This field will automatically be populated with the address of the Driver the Controller is installed beneath.
    • Driver Address – This field will automatically be populated with the address of the Driver the Controller is installed beneath.
    • Controller Type – Select the type of controller from the drop down list.
    • Controller Address – The Controller address is a virtual address assigned by the Access Control Security Application and should remain at 0.  The next available address will be assigned to the Controller.
    • Controller Description – Enter a Controller Description, this description will be displayed throughout the software in whenever reference to the Controller is made.
    • Click the green check mark to save changes or the blue x to exit without saving.