IS2000: Axis A1001: Setting up the 48-Bit HID Corporate Card

Below are instructions for setting up the 48-Bit HID Corporate Card with the Axis A1001.

  1. Navigate to the Hardware Manager.
  2. Unlock the module by clicking the lock/unlock Click on the Axis A1001 controller. Under the Properties window, click on the field for Card Formats to access the Card Formats window. (See Figure 1)

Figure 1:

setting-up-the-48-bit-hid-with-a1001_1

 

  1. Select a blank card format OR select a card format not being used. In the Card Formats window, enter the following information as specified below:

Note: The facility code in the example below is 3771. Facility codes change from site to site. Please ensure that you enter the proper facility code for your site.

setting-up-the-48-bit-hid-with-a1001_2

setting-up-the-48-bit-hid-with-a1001_3

 

Card Type: Wiegand
Number of Bits: 48
Number of bits to sum for even parity: 0
Address to start from: 0
Number of bits to sum for odd parity: 0
Address to start from: 0
Number of Facility Code bits: 22
Address to start from: 2
Number of Cardholder ID bits: 23
Address to start from: 24
Number of Issue Level bits: 0
Address to start from: 0
  1. Click Save in the Card Formats window.