1 Door ACP System



1 Door ACP System

The ACP series hardware is built on a flexible, open technology to provide management, real-time monitoring and control of your access control system using IS2000.


 ACP Series

Secure infrastructure and centralized online administration reduce your IT costs and allow you to easily manage all of your access points in a single location.  These versatile design features take care of present and future needs with ease and efficiency, and the systems are some of the most rugged and reliable controllers on the market, with a multitude of built-in features. The ACP-100 communicates natively on TCP/IP networks or 38.4 Kbps via RS-485, and can store up to 30,000 cardholders.  If using the inBIO controller option, then an additional 3,000 fingerprint templates can be stored.


Advanced Access Control Built-In:
Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Entry, Interlocking (link different doors with special logic, if one door is opened the other are closed), and Auxiliary Input/Output Linkages are built into controller firmware and programmable through IS2000.


Choice of Readers:
Supports any Wiegand-output reader, including HID Prox, iClass, and XceedID Multi-Technology.


Door Control and More:
Along with relay contacts for controlling door locks, easily programmable auxiliary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers.


Controller can store 100,000 events transactions that can be backed up in real-time with on-board optional SD card. Data is preserved if power is lost and the Controller continues to operate if network connection is interrupted.



  • Metal box enclosure and 12 volt power supply unit included
  • 30,000 card capacity (Additional 3,000 fingerprint templates with inBIO controller option)
  • 100,000 event buffer
  • 2 reader ports (26, 30, 32, 34, 35, 36, 37, 50, 66 bits Wiegand, 8 bits burst for PIN)
  • TCP/IP communication or 38.4 Kbps via RS-485
  • 2 input ports (1 exit button, 1 door sensor)
  • 2 output ports (1 FORM-C relay output for lock, 1 aux. FORM-C relay output)
  • SD Card data backup. (Users can make backup to SD Card ).
  • Multiple hardware protection measure.
  • Integration with other security systems (CCTV, Fire Alarm, BAS).
  • Supports different Wiegand readers (EM, Mifare and HID).
  • Input/Output ports to control doors connecting door sensor, alarms, electric doors, and push buttons.
  • Real-time monitoring of doors status.
  • Interlock function (link different doors with special logic, if one door is opened the other three are closed).
  • Multi-card operation, anti-passback and duress mode. 


 Board Wiring