ACP-EC10 Elevator Controller



ACP-EC10 Elevator Controller

The ACP-EC10 (Elevator controller) and ACP-EX16 (Elevator Extension Board) are used for elevator control applications. The system controls the elevator floor button(s), based on the user’s access credentials.

After a valid card read or fingerprint scan, the system will activate the necessary floors based on the assigned privileges. For example, Tom has access privileges to floors 3 and 10 in the software. If Tom attempts to push any other floor after a valid read, the system will take no action. Tom will only be allowed to push buttons 3 and 10.

The ACP series hardware is built on a flexible, open technology to provide management, real-time monitoring and control of your access control system using IS2000.


ACP-EC10 System Layout

Secure infrastructure and centralized online administration reduce your IT costs and allow you to easily manage all of your access points in a single location.  These versatile design features take care of present and future needs with ease and efficiency, and the systems are some of the most rugged and reliable controllers on the market, with a multitude of built-in features. 


Advanced Access Control Built-In:
Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Entry, and much more are built into controller firmware and programmable through IS2000.


Choice of Readers:
Supports any Wiegand-output reader, including HID Prox, iClass, XceedID Multi-Technology, and RS-485 Fingerprint reader.




  • 30,000 card capacity
  • 3,000 Fingerprint Templates
  • 10 Floor Button Control Relays
  • Support for up to 5 Elevator Extension Boards
  • 100,000 event buffer
  • TCP/IP and Ethernet communication
  • Multiple hardware protection measure.
  • Supports different Wiegand readers (EM, Mifare and HID).
  • Multi-card operation, anti-passback and duress mode. 



Elevator Wiring Diagram

Elevator Wiring Diagram