You have no items in your shopping cart.
IC2 / IC4
Network and host communication, door associations, card formats, OSDP and downloads.
A clear path from everyday operations to confident installation and support. Learn on Azure, Atlas and Mercury, then add the specialties your projects need.
LEARN. PRACTICE. VERIFY.Start with the shared foundation, practice on a designated training site, and demonstrate the result. Operators focus on daily tasks; administrators and support teams continue through commissioning, automation and recovery.
Plan for two full days or four half-days for the 16-hour core. Breaks, exams and specialty workshops are additional. Each practical exercise should use instructor-approved test data and equipment.
Select a role to see its recommended modules. Expand any lesson for learning outcomes, practical exercises, acceptance evidence and linked reading.
Required reading: Quick Start Guide; GUI Layout; Dashboard - Overview and Personalization; AI Assistant Overview; Using Ask Help Center
Practical exercise: Find one controller and its associated reader, inspect the last reported status, and ask the AI Assistant for an article relevant to a task you will perform.
Acceptance evidence: Learner identifies the correct hardware object and cites the article used.
Related online assessment: UnityIS General - Operations and On-Premises Setup. Assign according to the learner's role; this is one exam across its associated modules, not a separate exam for each module.
Required reading: Add or Delete Operator; Creating or Editing an Operator Profile; Change Operator Password
Practical exercise: Create an instructor-approved training profile and verify that one account can view the assigned area while a restricted account cannot perform an unassigned action.
Acceptance evidence: Instructor confirms the intended permissions using both accounts.
Related online assessment: UnityIS General - Operations and On-Premises Setup. Assign according to the learner's role; this is one exam across its associated modules, not a separate exam for each module.
Required reading: Add New Personnel Record; Add Photo to a Personnel Record; Create Access Control Reader Groups (ACRG); Create Access Levels by Adding ACRGs; Create Access Levels by Adding Reader(s); Disable or Enable a Personnel Record; Assign and Manage Temporary Access Levels
Practical exercise: Create a test employee, assign two doors with different permissions, verify an authorized and unauthorized presentation, then revoke the test access.
Acceptance evidence: Event history and the final personnel record match the intended permission change.
Related online assessment: UnityIS General - Operations and On-Premises Setup. Assign according to the learner's role; this is one exam across its associated modules, not a separate exam for each module.
Required reading: Creating Time Schedule with Intervals; Create/Edit a Time Schedule; Defining Holidays; Setting Doors Lock/Unlock Schedules
Practical exercise: Create a weekday access schedule and a separate door schedule. Test an interval boundary or instructor-provided holiday case. On the assigned Azure, Atlas or Mercury platform, add two readers/doors to the schedule, remove one, and verify that only the remaining assignment follows the schedule.
Acceptance evidence: Learner explains the active/inactive behavior and verifies the affected door or reader state.
Related online assessment: UnityIS General - Operations and On-Premises Setup. Assign according to the learner's role; this is one exam across its associated modules, not a separate exam for each module.
Required reading: Event Manager; Auto Alarm Alarm Manager; Door Control; Dashboard - Active Alarm Summary; Dashboard - System Health & Offline Devices
Practical exercise: Investigate a test access-denied event, acknowledge a designated test alarm, and perform an instructor-approved door command. Explain the host dependency documented for Timed Unlock.
Acceptance evidence: Learner records the relevant event time/address and confirms the final door state.
Related online assessment: UnityIS General - Operations and On-Premises Setup. Assign according to the learner's role; this is one exam across its associated modules, not a separate exam for each module.
Required reading: Add/Configure Azure IC2/IC4 Controllers; Azure IC2/IC4 Controller: Network Configuration; Azure OSDP Reader Support; Establishing Host Communications with Azure/ZK Atlas Panels; OSDP Reader Configuration for Atlas Controllers; Troubleshooting- Atlas and Azure Controller Connectivity Issues; Mercury Controllers - Quick Configuration and Power Recovery Checklist; Configuring Mercury Controller - IP Client; Mercury- LP Series Hardware Setup Guide; Card Formats; Understanding OSDP and Why It's Replacing Wiegand; Reports- Hardware
Practical exercise: Rotate through Azure, Atlas and Mercury lab stations (approximately 50 minutes each). At each station, review communication and card-format settings, verify a prepared reader/door channel, complete an instructor-selected download, and test a credential and input. Use the matching family guide to diagnose a prepared connectivity or reader fault.
Acceptance evidence: For each of the three primary families, record controller identity, communication status, download completion and the observed reader/door result.
Related online assessment: UnityIS General - Operations and On-Premises Setup. Assign according to the learner's role; this is one exam across its associated modules, not a separate exam for each module.
Required reading: Reports- Personnel; Reports- History Audits; View/Export User Transaction History; Report Manager - Use the Background Report Queue; Report Queue - Status, Privacy, Expiration, and Troubleshooting; Custom Reports - SQL, Column Headings, and Formatting
Practical exercise: Produce a personnel or transaction report for a stated date range, preview it, export it and locate its queue entry. For the advanced lab, validate one read-only custom report against known training data.
Acceptance evidence: Exported rows, date boundaries and requested columns match the instructor's test data.
Related online assessment: UnityIS Reports - Criteria, Custom SQL and Exports. Assign according to the learner's role; this is one exam across its associated modules, not a separate exam for each module.
Required reading: UnityIS Video Management System; Video Manager Views; Recorded Video Timeline and Search; Video Links, Workflows, and Event Evidence; Video Incident Investigations
Practical exercise: Create or use a test view, locate an instructor-approved recorded event and play the associated clip. For an event-recording lab, generate a new test event and verify a new recording exists.
Acceptance evidence: Learner identifies the correct event/camera/time and demonstrates successful recorded playback.
Related online assessment: UnityIS VMS - Setup, Views, Analytics and Evidence. Assign according to the learner's role; this is one exam across its associated modules, not a separate exam for each module.
Required reading: Introduction to Workflow Builder; Creating Your First Workflow; Understanding Workflow Triggers, Conditions, and Actions; Using Schedule / Time Workflows; Trigger and Macro Definitions; Trigger/Macro example - Access Granted Trigger to Pulse Relays; Pulse a Relay When a Door Is Forced Open
Practical exercise: Using an Azure, Atlas or Mercury lab event, build one instructor-approved workflow with a reversible test action. Where supported by the selected controller and dialect, also review a controller trigger/macro example. Verify the applicable save/download result and the physical action.
Acceptance evidence: Learner tests both the trigger condition and its restoration and checks for conflicting rules.
Related online assessment: UnityIS Level 2 - Workflows, Triggers and Macros. Assign according to the learner's role; this is one exam across its associated modules, not a separate exam for each module.
Required reading: UnityIS Server Specifications (On-Prem); UnityIS Cloud Overview; On-Prem Backups; On-Prem Database Maintenance Responsibilities; Cybersecurity - Workspace Overview, Permissions, and Start Module; UnityIS Secure Gateway for Legacy Controllers; How to generate a HAR capture on Chrome or Edge
Practical exercise: Document a training-site recovery checklist, identify one asset finding or connectivity issue, and prepare a support summary containing version, address, timestamp and sanitized evidence.
Acceptance evidence: Instructor confirms responsibilities, backup ownership and evidence quality; any scan or recovery action uses only the authorized lab scope.
Related online assessment: UnityIS Cybersecurity - IPMeter and Secure Gateway. Assign according to the learner's role; this is one exam across its associated modules, not a separate exam for each module.
Course hours are planning estimates. Complete the modules and practical work assigned by your training lead; not every learner needs every exam.
These are the default platforms for hardware demonstrations, lab stations and commissioning assessments. Rotate through all three in the installer/support track, using each family’s own setup requirements.
Network and host communication, door associations, card formats, OSDP and downloads.
Host communication, supported OSDP configurations and model-specific troubleshooting.
IP Client setup, controller and sub-controller configuration, downloads and recovery checks.
Other manufacturers, including VertX, are optional tracks for the projects that use them.
Add the hardware families and licensed modules relevant to your installation. Workshop time includes instruction and lab work; exam time is additional.
Configure network/host communication, reader formats, door associations and supported OSDP. Verify downloads, door contact and REX; diagnose a prepared offline case.
Reading: Add/Configure Azure IC2/IC4 Controllers; Azure IC2/IC4 Controller: Network Configuration; Establishing Host Communications with Azure/ZK Atlas Panels; Azure OSDP Reader Support; OSDP Reader Configuration for Azure IC2/IC4/RI2M; Troubleshooting- Atlas and Azure Controller Connectivity Issues
Establish host communication, configure supported OSDP and verify a door channel. Review model-specific troubleshooting, including Atlas260 input assignment considerations.
Reading: Establishing Host Communications with Azure/ZK Atlas Panels; OSDP Reader Configuration for Atlas Controllers; Troubleshooting- Atlas and Azure Controller Connectivity Issues; Atlas260 Goes Offline After an Input Is Assigned to Reader 3 or Reader 4
Review IP Client communication, controller and sub-controller configuration, card formats, downloads and power-recovery verification.
Reading: Mercury Controllers - Quick Configuration and Power Recovery Checklist; Configuring Mercury Controller - IP Client; Mercury- LP Series Hardware Setup Guide; Card Formats; Move a Mercury Sub-Controller to Another Controller
Select Axis, iSTAR, Aperio, dormakaba, biometrics or mobile credentials only when relevant to the company project. Use the corresponding exam and family-specific guide.
Reading: Use the optional manufacturer links in Section 8.
For teams supporting VertX sites: review commissioning, VFF formats, I/O Linking, managed schedule groups and V100 input/REX behavior.
Reading: VertX/Edge - Setup and Commissioning; VertX/Edge - VFF Card Formats and Universal Format; VertX/Edge - I/O Linking, Triggers and Time Schedules; VertX/Edge - Inputs, Request to Exit and Hardware Status
Prepare/import a map, plot a test device, inspect its status and demonstrate a permitted map command.
Reading: Graphic Maps - 2D and 3D Overview; 2D Graphic Maps - Import and Select a Map; 2D Graphic Maps - Plot, Move, and Remove Devices; 3D Graphic Maps - Prepare and Import a GLB Model; 3D Graphic Maps - Plot, Move, Transfer, and Remove Devices; Graphic Maps - Plot Custom Commands and Command Menus
Verify event-to-video correlation and a new recording; investigate a selected analytic event and search its attributes.
Reading: Adding a UnityIS Video Driver; EdgeDX AI Analytics Integration with UnityIS; Configure an EdgeDX Network Action for UnityIS; Use EdgeDX AI Events with UnityIS Workflows and Video Recording; Find Video Using Advanced Attributes; Video Incident Investigations
Review findings and asset mapping. Explain the supported gateway topology; verify one authorized test connection.
Reading: Cybersecurity - Workspace Overview, Permissions, and Start Module; Cybersecurity - Configure IPMeter Servers and Run Scans; Cybersecurity - Review Findings, Asset Impact, and Export Reports; Mapping UnityIS Assets to Cybersecurity IP Addresses; UnityIS Secure Gateway for Legacy Controllers
Locate a checked-out or overdue test key, interpret its custody event and prepare a response/report.
Reading: Torus Key Management Integration Overview; Configure the Torus Key Management Driver; Find Checked-Out, Overdue, and Returned Torus Keys; Torus Events, Alarms, Reports, and Workflows; Troubleshoot the Torus Key Management Integration
Place a test call, confirm the station mapping, locate its event and inspect related video evidence.
Reading: Zenitel Intercom Integration; Configure a Zenitel Intercom Station; Using Zenitel Intercom Calls, Events, and Video Evidence
Schedule a test visit, perform a kiosk arrival, verify the host/visitor workflow and complete departure.
Reading: Visitor Manager Overview and Licensing; Set Up Visitor Manager and the Check-In Kiosk; Schedule Visits, Register Walk-Ins, and Manage Arrivals; Use the Visitor Check-In Kiosk; Troubleshoot Visitor Manager
Prepare an instructor-reviewed test plan, conduct a controlled test incident, and document restoration and evidence.
Reading: Emergency Manager Overview: Purpose, Safety, and Operational Model; Configure Emergency Manager Permissions and Notification Resources; Create and Test an Emergency Response Plan; Activate and Manage an Emergency Manager Incident
Discover a designated lab device, map one point and verify its reported state. Only perform authorized control actions.
Reading: UnityIS BACnet/IP Building Automation; Discover and Add BACnet/IP Devices; Map BACnet Points to UnityIS
Explain token acquisition and transmission, scopes and base URLs; design a read-only integration test before considering state-changing calls.
Reading: Use the API section of the resource index and the instructor-selected integration guide.
Begin with the assigned foundation and primary hardware exams. Add specialties as your responsibilities grow. Reading links and exams open in new tabs so your curriculum stays open.
Scope note: the linked JACE/R2R articles are training editions describing the intended integration workflow. This exam covers planning and responsibility boundaries; it does not establish that an installation's integration has been commissioned.
Optional track: assign only to teams supporting VertX installations. The I/O Linking and input/REX guides supplement the commissioning, format and connectivity exam scope.
No exams match those filters. Try another search or clear your filters.
Exam durations are estimates. Review the current exam description and requirements before beginning. Passing scores and availability can change. Follow the instructor’s and exam’s rules during an assessment.
The included exam directory is shown. Visit the certification page to confirm current availability.
Complete assigned modules, demonstrate the practical tasks and meet the passing score for each assigned exam. Keep the instructor’s practical sign-off alongside the learner’s online exam results.
Help Center: kb.imron.com
Online certification directory: Browse UnityIS exams
Recommended completion standard: complete assigned modules, demonstrate each assigned practical task, and meet the passing score shown by every assigned online exam. Keep the online exam result/certificate separate from the company's instructor-signed practical record. This curriculum does not introduce a new combined certification credential.
Open the UnityIS Help Center and use Ask IMRON for product questions and step-by-step guidance. Ask a specific question, name the hardware family, and open the article behind the answer.
For supported in-app assistance, use the wand icon in UnityIS. Available guided commands depend on the installed version and your permissions. The Help Center chatbot explains procedures; it does not verify your site’s live state.