You have no items in your shopping cart.
VertX EVO V2000 Controller
Overview
The HID VertX products provide a complete and fully featured hardware/firmware infrastructure for OEM access control software host systems, communicating via industry standard TCP/IP protocol, over 10/100 Mbps Ethernet, or the Internet. It can also interface with a Windows® DLL. The V2000 boasts a 32-bit RISC processor running the Linux Operating System. On-board flash memory allows program updates to be downloaded via the network. The V2000 connects to two access control card readers via Wiegand or Clock-and-Data interface controlling either one or two doors. This architecture takes advantage of the existing corporate LAN and the existing CAT-5 cable.
VertX EVO V2000 Controller/2 Doors
- Non-Expandable, Stand-alone, 2-Door Controller
- 2 Reader Ports
- 2 REX Inputs
- 2 Door Contact Inputs
- 2 Lock Dry Closure Relays
- 2 AUX Dry Relays
- Tamper Input
- AC & Battery Fail Inputs
- (Does not communicate with Sub-Controllers)
- 5000 Event Buffer
- Expandable to 250,000 Card Population
Key Features
- Connects with and stores a complete access control and configuration database for one or two controlled doors and 44,000 cardholders with expansion capability to 250,000 cardholders.
- Processes access control decisions.
- Reports supervised inputs/alarms with 255 priorities.
- Includes an HTTP API, Windows® DLL-based API, and a direct communication API.
- Allows local connection of a laptop computer for diagnostics and configuration.
- Connects to the host and to other devices on the TCP/IP network.
- Receives and processes real time commands from the host software application.
- Reports all activity to the host
- Controls and communicates with all connected devices.
- Buffers offline transactions and uploads to the host when communication is restored.
- UL 294 and UL 1076 recognized components.
Dimensions
5.8' W x 4.825' H x 1.275' D (147.32 mm x 122.55 mm x 32.38 mm)
Weight
13.6 oz (.38 kg)
Power Supply Requirements
160 mA @ 12-18 VDC (with no readers connected)
Recommended: Supervised linear power supply with battery backup, input surge protection, and AC Fail and battery low contact outputs. V2000 can supply 350 mA @ 12 VDC to two connected readers. Separate supervised DC supply with battery back-up recommended for door locking or relay activated devices or for HID MaxiProx readers.
Cable Distance
TCP/IP – 300 feet (100 m) to next device using Category 5 cable, Alpha 9504C or 9405F
Wiegand – 500 feet (150 m) to reader using ALPHA 1299C, 22AWG, 9-conductor, stranded, overall shield. (Fewer conductors needed if all control lines are not used)
Input Circuits – 500 feet (150 m), 2-conductor, shielded, using ALPHA 1292C (22AWG) or Alpha 2421C (18AWG)
Output Circuits – 500 feet (150 m), 2-conductor, using ALPHA 1172C (22AWG) or Alpha 1897C (18AWG)
Minimum wire gauge depends on cable length and current requirements.
Operating Environment
Indoors or customer supplied NEMA-4 rated enclosure
Temperature
32° to 122° F (0° to 50° C)
Humidity
5% to 95% relative, non-condensing
Communication Ports
TCP/IP – 10 or 100 Mbps
SIA standard Wiegand/clock and data – two ports
Certifications
UL 294 and UL 1076 Recognized Component for the US
CSA 205 for Canada
FCC Class A Verification
EMC for Canada, EU (CE Mark), Australia (C-Tick Mark), New Zealand, Japan